CAD-files

Forum about the OS-Railway project available on Thingiverse. Here you can ask questions, look at building pictures, share ideas, pictures and STL's.
admin
Site Admin
Posts: 306
Joined: Thu Jan 11, 2018 7:46 pm

CAD-files

Postby admin » Tue Oct 23, 2018 7:57 am

Here are CAD-files of parts you can use in order to design your own cars and accessories. More files will be uploaded here later.
Attachments
turnout_left_and_right.f3d
(3.04 MiB) Downloaded 1156 times
track_curve_r400_30deg.f3d
(465.06 KiB) Downloaded 1039 times
track_curve_r300_30deg.f3d
(462.94 KiB) Downloaded 1068 times
track_straight_200mm.f3d
(341.91 KiB) Downloaded 1112 times
track_straight_240mm v4.step
(200.24 KiB) Downloaded 1297 times
Boogie-non-motorized.step
(304.88 KiB) Downloaded 1285 times

admin
Site Admin
Posts: 306
Joined: Thu Jan 11, 2018 7:46 pm

Re: CAD-files

Postby admin » Sun Apr 05, 2020 10:28 pm

fusion-project.JPG
fusion-project.JPG (103.2 KiB) Viewed 10021 times
This is the Fusion 360-project for the arc bridge I did a long time ago. I had not really learned how to master Fusion at that time so be aware that the project can be a bit messy! :)

Link to the thingiverse page for this project: https://www.thingiverse.com/thing:2172709
Attachments
Arc-Bridge.f3d
(2.11 MiB) Downloaded 145 times

admin
Site Admin
Posts: 306
Joined: Thu Jan 11, 2018 7:46 pm

Re: CAD-files

Postby admin » Thu Jun 04, 2020 1:17 pm

turnout.JPG
turnout.JPG (101.18 KiB) Viewed 761 times
New 2020 Track. Be aware that I've had some issues with component references in this project as I sped things up by not drawing everything from the ground up. I imported the connection ends with a small part track on them and built on that. So if you go back in history in this project and start to modify things you will end up with a complete mess. I needed to clean the STL's after exporting them. Now when I know the concept is working I might redraw them as new clean projects, but hey... it's more fun to work on new things.. :D
I was not able to export the curved track as a Fusion project, however step was possible.

If you want to create some new track parts I suggest you use the joiner and sleeper part as a starting point.
Attachments
Curve-R400-30deg.step
(9.78 MiB) Downloaded 9 times
Track Sleeper.f3d
(673.78 KiB) Downloaded 8 times
Track Joiner.f3d
(204.32 KiB) Downloaded 9 times
Straight 200mm.f3d
(3.52 MiB) Downloaded 8 times
Turnout-R400.f3d
(23.22 MiB) Downloaded 14 times


Who is online

Users browsing this forum: No registered users and 3 guests