200% SB90 on a Creality Ender 3

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
Kylecox1019
Posts: 16
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Thu Aug 01, 2019 6:30 pm

Hull sections one and two have been pieced together out of the 15 individual pieces. I used a soldering iron to first join them and create a channel. After that I went back with my pen to fill the voids and create a solid water tight hull.
Attachments
92B0C278-DB30-4676-84E5-41C9E8C47FBD.jpeg
92B0C278-DB30-4676-84E5-41C9E8C47FBD.jpeg (2.82 MiB) Viewed 33 times
4A7F399D-8E11-47AD-8BBA-3D135D61A38B.jpeg
4A7F399D-8E11-47AD-8BBA-3D135D61A38B.jpeg (204.17 KiB) Viewed 33 times
BFC878EA-675F-4DB5-9076-F8DD68827ACF.jpeg
BFC878EA-675F-4DB5-9076-F8DD68827ACF.jpeg (459.13 KiB) Viewed 33 times

Kylecox1019
Posts: 16
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Tue Aug 06, 2019 11:07 am

Well, all the main hull pieces are printed. Started messing with the pumps. I melted some brass inserts into the pumps for the attaching hardware. After some chatting with Matsa about his 1/10th I’ve got an idea on electronics and running gear.
Attachments
DB29F9C1-08C3-4D97-9BED-11DE0AB96751.jpeg
DB29F9C1-08C3-4D97-9BED-11DE0AB96751.jpeg (3.06 MiB) Viewed 24 times
31AF3CC5-4B8A-40EA-B7F1-412489D516B6.jpeg
31AF3CC5-4B8A-40EA-B7F1-412489D516B6.jpeg (1.36 MiB) Viewed 24 times

Kylecox1019
Posts: 16
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Thu Aug 08, 2019 4:44 pm

Hulls is almost done, paint prep and sanding is coming up next. Not looking forward to all that.
Attachments
B4A60F73-EC30-4B79-A38E-FF2E8052BD42.jpeg
B4A60F73-EC30-4B79-A38E-FF2E8052BD42.jpeg (2.23 MiB) Viewed 21 times
49B2DAB8-96E5-4F48-855E-7ED2EF94EB4E.jpeg
49B2DAB8-96E5-4F48-855E-7ED2EF94EB4E.jpeg (320.37 KiB) Viewed 21 times

Kylecox1019
Posts: 16
Joined: Wed May 08, 2019 11:57 pm

Re: 200% SB90 on a Creality Ender 3

Postby Kylecox1019 » Sat Aug 10, 2019 6:26 pm

I’ve made some more progress. The cabin, jet pumps and forward deck have all been printed and pieced together. I’ve put brass inserts everywhere on the pumps to make assembly and disassembly super simple. Just waiting for hobbyking to send the motors so I can get the last bulkhead in and start priming and painting.
Attachments
2C3B0594-C832-476E-9CFB-F38AD37C14A5.jpeg
2C3B0594-C832-476E-9CFB-F38AD37C14A5.jpeg (319.15 KiB) Viewed 14 times
22041F86-16C7-4698-ACFE-001A1E3D5BE0.jpeg
22041F86-16C7-4698-ACFE-001A1E3D5BE0.jpeg (3.83 MiB) Viewed 14 times
36CDEF10-9FCC-45BB-BA0D-02F892CE6BEE.jpeg
36CDEF10-9FCC-45BB-BA0D-02F892CE6BEE.jpeg (3.79 MiB) Viewed 14 times
C1AEDE41-641E-4483-B0E6-CB94C3A873F5.jpeg
C1AEDE41-641E-4483-B0E6-CB94C3A873F5.jpeg (2.61 MiB) Viewed 14 times
DB839519-BED6-46F3-927F-D120307D74AB.jpeg
DB839519-BED6-46F3-927F-D120307D74AB.jpeg (1.77 MiB) Viewed 14 times
35BC3DEC-31C6-4E6B-AA61-2CA5E9B96034.jpeg
35BC3DEC-31C6-4E6B-AA61-2CA5E9B96034.jpeg (3.05 MiB) Viewed 14 times


Who is online

Users browsing this forum: No registered users and 0 guests