Darren's SB90 Combat boat

This is the building forum for the Combat Boat 90. If you are interested in the STL's for this project, they are available to those who help me by contributing 15 Euro. Then you get access to a sub-forum where STL's, instructions and mods are located.
Darren
Posts: 2
Joined: Thu Jun 13, 2019 12:17 pm

Darren's SB90 Combat boat

Postby Darren » Fri Sep 06, 2019 2:06 pm

Ok so I printed the hull and have glued 3 sections together so far leaving the forth as recommended.
20190906_155117.jpg
20190906_155117.jpg (2.38 MiB) Viewed 150 times
20190906_155058.jpg
20190906_155058.jpg (2.67 MiB) Viewed 150 times
Here are most of the parts for th SB90 Printed and fist coat of primer ,I will wet sand with 1200 -2000 grit water paper ,prime and sand again until I get all parts smooth as glass ,for the primer I use Tamiya filler primer .
20190906_161457.jpg
20190906_161457.jpg (3.17 MiB) Viewed 146 times
Hardware has arrived
Motors ,escapes and servos and radio ,cant seem to get the battery but i'm sure I can get that in South Africa
20190906_163351.jpg
20190906_163351.jpg (3.08 MiB) Viewed 145 times
20190906_163341.jpg
20190906_163341.jpg (2.98 MiB) Viewed 145 times
20190906_163337.jpg
20190906_163337.jpg (3.24 MiB) Viewed 145 times
20190906_163424.jpg
20190906_163424.jpg (3.02 MiB) Viewed 145 times

Now this is where I need help ,has anyone got installation pictures or diagram on what parts to print for these motors and escapes and any types of wiring diagram of how they all go together have never owned a rc boat before so have no idea how to couple up the escapes and motors to the servos and receiver etc, any help on printing list and wiring will be much appreciated from a total novice .....

admin
Site Admin
Posts: 228
Joined: Thu Jan 11, 2018 7:46 pm

Re: Darren's SB90 Combat boat

Postby admin » Fri Sep 06, 2019 10:23 pm

Looks good so far!

If I'm not mistaken, these modified motor mounts are for those motors, go to the thread with this name:
"My mods (Modified motor mount and water pressure outlet from impeller duct)" and download the zip-file and check out those mounts.


Who is online

Users browsing this forum: No registered users and 2 guests