The IRON MAIDEN

This is the building forum for the Combat Boat 90. This is an exclusive forum for contributors. By contributing the equivalent of 15 Euro, you get access to this forum which contains extensive instruction material, tons of pictures, STL's and other stuff.
chappy
Posts: 11
Joined: Fri Oct 12, 2018 3:08 am

The IRON MAIDEN

Postby chappy » Sat Dec 08, 2018 2:07 am

Long story short
Melt down in drive see photo
Started IRON maiden. @ 125% of standard. What scale would that be and what motors would you suggest any help please.
Attachments
20181208_120543.jpg
IRON maiden 2
20181208_120543.jpg (4.23 MiB) Viewed 160 times
20181207_113423.jpg
20181207_113423.jpg (4.16 MiB) Viewed 160 times
20181207_113446.jpg
20181207_113446.jpg (4.8 MiB) Viewed 160 times

admin
Site Admin
Posts: 150
Joined: Thu Jan 11, 2018 7:46 pm

Re: The IRON MAIDEN

Postby admin » Sat Dec 08, 2018 5:05 pm

Oh that's some serious meltdown! :O I have bought stainless ball bearings to upgrade mine with, fortunately for me only the cover with the hole in melted!

angeloreyes27
Posts: 6
Joined: Mon Mar 05, 2018 12:29 pm

Re: The IRON MAIDEN

Postby angeloreyes27 » Mon Dec 10, 2018 9:32 am

I made the drills a little bit bigger, and fill the whole bearing hose with silicon grease.
Another recommendation is to never run the motors to full speed outside of water.
If you are able, is also a good idea to print the main housing in a material harder than PLA, as ABS or PETG

chappy
Posts: 11
Joined: Fri Oct 12, 2018 3:08 am

Re: The IRON MAIDEN

Postby chappy » Wed Dec 12, 2018 12:11 am

I am fitting bearings on the iron maiden 2, how do you work out the scale, picks to come.


Who is online

Users browsing this forum: No registered users and 1 guest